NEW FACET PUMP 476087E REPLACES FACET PUMP 478360
DESCRIPTION:
Note: Facet fuel pumps are not FAA approved
Fuel compatibility:
All models of Facet Gold-Flo high performance solid state fuel pumps are compatible with gasoline, diesel, biodiesel, mixed alcohol fuels and fuel additives.
Reliability:
The new Gold-Flo solid state fuel pump is an improved version of the Interrupter model. It has solid state circuitry and will meet or exceed all performance specifications and is fully interchangeable.
(These pumps have shown nearly double the life span of their closest competition, according to test data.)
Easy to install - easy to maintain:
Two-bolt mounting simplifies installation. Nothing to adjust. For best results, mount the pump close to the fuel tank and below the fuel level. The pump is self-priming up to 24 inches of vertical fuel height. Vertical mounting is preferred to ensure that nominal pressures are maintained. The only intervention normally required is a simple cleaning of the filter and the fuel inlet cavity.
Eliminate the vapor block:
When installed correctly on most vehicles, it ensures a constant, regular and reliable supply of fuel under pressure on hot days or at high altitudes.
Features:
12 - 24 inches of dry lift
capacity 36 GPH / 136 lt
Working pressure 5.5 / 4 PSI 80.379-0.275 BAR)
Transient protection - 24 volts only
State-of-the-art electronics
Sealed electronics
Built-in anti-siphon valve (positive closing)
UL certified
VCA certified
Compliant with Mil-std-461D
Replaceable 74 micron filter
Integrated magnet to collect metal particles for filtration
additional.
Average absorption: 1.6 amperes
Self-priming and self-regulating.
32 ounces and 5 inches
Corrosion resistant over 100 hours of salt spray.
Operating temperature range: -40F to 180F
DESCRIPTION:
Note: Facet fuel pumps are not FAA approved
Fuel compatibility:
All models of Facet Gold-Flo high performance solid state fuel pumps are compatible with gasoline, diesel, biodiesel, mixed alcohol fuels and fuel additives.
Reliability:
The new Gold-Flo solid state fuel pump is an improved version of the Interrupter model. It has solid state circuitry and will meet or exceed all performance specifications and is fully interchangeable.
(These pumps have shown nearly double the life span of their closest competition, according to test data.)
Easy to install - easy to maintain:
Two-bolt mounting simplifies installation. Nothing to adjust. For best results, mount the pump close to the fuel tank and below the fuel level. The pump is self-priming up to 24 inches of vertical fuel height. Vertical mounting is preferred to ensure that nominal pressures are maintained. The only intervention normally required is a simple cleaning of the filter and the fuel inlet cavity.
Eliminate the vapor block:
When installed correctly on most vehicles, it ensures a constant, regular and reliable supply of fuel under pressure on hot days or at high altitudes.
Features:
12 - 24 inches of dry lift
capacity 36 GPH / 136 lt
Working pressure 5.5 / 4 PSI 80.379-0.275 BAR)
Transient protection - 24 volts only
State-of-the-art electronics
Sealed electronics
Built-in anti-siphon valve (positive closing)
UL certified
VCA certified
Compliant with Mil-std-461D
Replaceable 74 micron filter
Integrated magnet to collect metal particles for filtration
additional.
Average absorption: 1.6 amperes
Self-priming and self-regulating.
32 ounces and 5 inches
Corrosion resistant over 100 hours of salt spray.
Operating temperature range: -40F to 180F
This product was added to our catalog on Thursday 08 October, 2009.